Trotec SP3000 User Manual

Setup and installation
6.3 Connections
6.3.1 Grid connection
Warning Current
Wrong voltage can cause damage to the machine.
Do not operate the machine, if the voltage do not match, as this may cause damage to the
machine.
The mains and operating voltage, as stated next to the connecting sockets must match.
Connect the end of the mains cable to the main connection socket.
6.3.2 Operating console connection
The connection has to be carried out by a Trotec technician.
6.3.3 Connecting an exhaust system from Trotec
Warning Current
Wrong voltage can cause damage to the machine.
Do not operate the machine, if the mains voltage does not match the voltage required by the
exhaust system, as this may cause damage to the machine.
Make sure that the mains voltage matches the voltage required by the exhaust system.
The connection has to be carried out by a Trotec technician.
Follow the operation and maintenance instructions in the manual of the exhaust system.
6.3.4 Connecting a cooling unit from Trotec Laser GmbH
Warning Current
Wrong voltage can cause damage to the machine.
Do not operate the machine, if the mains voltage does not match the voltage required by the
exhaust system, as this may cause damage to the machine.
Make sure that the mains voltage matches the voltage required by the exhaust system.
56 ENGLISH (Translation)

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English