Trotec SP3000 - Temperature and humidity; Required tools for unloading and transport; Relocation of the machine

Transport
5.3 Temperature and humidity
Transport conditions
Transport temperature (ambiente temperature): -10 °C to +40 °C
Relative humidity: Maximum 70%, non-condensing
■
Avoid high temperature fluctuations.
Storage conditions
Storage temperature (ambiente temperature): +0 °C bis +30 °C
Relative humidity: Maximum 60%, non-condensing
■
Avoid high temperature fluctuations.
5.4 Required tools for unloading and transport
Unloading the packaged machine parts Transport the unpacked machine parts
Type Forklift Pallet truck
Weight Weight ≥ 1,5t Weight ≤ 1,5t
Fork extension approx. 2m (78.74 inch) approx. 2m (78.74 inch)
5.5 Relocation of the machine
Steps:
1. Switch off the machine.
2. Disconnect the power cable.
3. Remove the exhaust system.
4. Reposition the machine (e.g. with auxiliary equipment if necessary) and place it on a level, clean floor.
5. Adjust the machine.
6. Initial commissioning of the electrical system.
7. Carry out function test.
52 ENGLISH (Translation)