Transport
5 Transport
5.1 Safety notes
Warning
Risk of injury
There is risk of injury from falling parts during transport, loading and unloading of the machine.
– Follow the safety notes.
Observe the safety notes to avoid damage to the machine from improper handling during transport:
■
Always move the machine with utmost care and attention.
■
Transport the machine/machine components only in its original packaging.
■
Take the machine’s center of gravity into account when transporting it (minimize the risk of tipping over).
■
Observe the packaging symbols (e.g. transport the machine only in upright position).
■
Take measures to prevent the machine from slipping sideways, tipping or falling over.
■
Transport the machine as carefully as possible in order to prevent damage.
■
Avoid vibrations.
■
When transporting the machine overseas, the device must be packaged airtight and protected against
corrosion.
■
When transporting outdoors, transport only in vehicles with roof or sufficient weather protection.
■
Protect the machine against transportation damage using straps and inserts, and leave sufficient gaps to
other transported items.
■
Do not place any other loads or items on the machine or machine components.
5.2 Delivery state
Unless otherwise agreed, the machine and additional accessories get delivered in wooden crates.
Please refer to the "Pre-installation guide" for further information.
Caution
Keep the original packaging.
ENGLISH (Translation) 51
To Next Page
Loading...
Need help?
General
