Maintenance
9 Maintenance
9.1 Safety notes
Danger
Improper maintenance can cause serious injury or damage.
Maintenance may be carried out only by authorized, trained personnel who are familiar with how
to operate the machine and in strict observance of all safety notes.
Danger
Risk of fire or explosion.
Improper handling of the machine may cause fire or explosion.
– For cleaning the machine, do not use explosive or flammable substances or cleaning
agents.
– No flammable or explosive liquids may be stored in or near the machine.
– Always keep the system clean, and remove flammable parts from the working area or
exhaust area.
Warning Current
Danger of electrical shock.
Work on electrical fittings may be carried out only by qualified personnel and in strict
observance of the safety notes.
Before any maintenance work takes place, disconnect the machine from the mains voltage and
make sure the system is de-energized.
9.2 Maintenance schedule
Daily Weekly Monthly
Laser
Entire working area Clean whenever required
protection disk Continuous monitoring.
Exchange in case of
turbidity and/or ageing or
at least after 5 years.
Lens and protective glas Check
Clean whenever required
Laser deflector shield and
nozzle
Check
Clean whenever required
ENGLISH (Translation) 83
To Next Page
Loading...
Need help?
General
