Trotec SP3000 - Page 88

112 pages

Save Page as PDF

To Next Page

To Previous Page

Maintenance

5. With the aid of the optics set loosen the clamping ring

by rotating it counterclockwise.

6. Remove the clamping and sealing ring.

88 ENGLISH (Translation)

Main Page

Table of Contents5
General Information8
Information about this Manual8
Complementary Documentation8
Explanation of Symbols9
Liability and Warranty10
Scope of Delivery (Standard Configuration)11
Type Plate12
Safety13
Safety Principles13
Intended Use13
Improper Use14
Machine Modification14
Operating Modes14
Laser Safety15
Laser Classification15
Laser and Working Area18
Area of Responsibility20
Responsibilities of the Operator20
Responsibilities of the Operating Personnel21
Operating and Service Personnel Requirements21
Machine Identification (Warning and Safety Stickers)22
Safety Devices24
Main Switch25
Key Switch25
Emergency Stop Button26
Casing Elements, Side Panel and Covers26
Warning Lamp26
Safety Bumper and Micro Switch27
Light Curtain27
Laser Deflector Shield and Hall Sensor27
Light Sensor and Reflector27
In Case of Safety Device Malfunction28
Tests to be Carried out28
Mechanical and Electrical Brake Test of the X Portal32
In Case of Emergency37
Secondary (Indirect) Hazards37
Fire Hazard37
Gases, Fumes and Dust38
Reflection through Materials38
Information about Damaged Optics40
Technical Data41
Exhaust System Requirements41
Materials43
Machine Overview46
General Overview46
Tables (Multifunctional Table Concept)48
Lens(Es)49
Nozzles50
Transport51
Safety Notes51
Delivery State51
Temperature and Humidity52
Required Tools for Unloading and Transport52
Relocation of the Machine52
Setup and Installation54
Safety Notes54
Operating Environment55
Temperature and Humidity55
Connections56
Grid Connection56
Operating Console Connection56
Connecting an Exhaust System from Trotec56
Connecting a Cooling Unit from Trotec Laser Gmbh56
Operation58
Before Commissioning58
Software59
Power On/Off60
Lense Placement62
Focusing Methods64
Focus Tool65
Sonar Technology TM65
Software: Safety Analysis67
Control Panel75
Keypad77
Description78
Shortcuts81
Maintenance83
Safety Notes83
Maintenance Schedule83
Cleaning85
Machine85
Optics in General85
Cleaning the Laser Head Exhaust91
Cleaning the Vent Slots of the Table Exhaust92
Ultrasonic Sensor (Option Sonar Technology TM )92
Cleaning the Protective Glass 2,5 Inch93
Cleaning the Protective Glass 5,0 Inch96
Troubleshooting98
Error, Cause and Remedy98
Contact Details100
Disassembly101
Disposal102
Appendix103

Trotec SP3000 - Page 88

Table of Contents

Other manuals for Trotec SP3000

Related product manuals