4-6
NOTE
When the default screen is displayed, the up and
down arrow keys can be used to adjust the display
contrast.
3. Press 〈MENU〉 to display the MAIN MENU.
4. From the MAIN MENU, press (5) to access the Scale
Menu. Press
(3) to verify the scale. Follow the prompts
to verify the scale. For more information, refer to
page 6-14.
NOTE
Scale verification should be done at room
temperature.
5. Close the chamber door. The oven applies power to the
heating element.
6. Press
(8) to access the Miscellaneous Menu. For more
information, refer to page 5-31.
a. The oven is shipped with the current date and time
(Eastern Standard Time) stored in its memory. By
default, the oven displays the date in mm/dd/yyyy
format (where mm = month, dd = day, and yyyy =
year) and the time in AM/PM format. To change the
date or time, or to change the display format, press
(1) to access the Time/Date Menu. For more
information, refer to page 5-32 and 5-33.
b. The oven is shipped with the baud rates for the
serial communications and auxiliary ports set to
9600 baud. To change the baud rates, press
(2). For
more information, refer to page 5-34.
c. As shipped, the oven is setup to display
temperatures in degrees Celsius. To select the
desired temperature scale (Celsius or Fahrenheit),
To Next Page
Loading...
Need help?
General
