Model 2701-B 2–7
2. GETTING STARTED
SETUP MENU
After turning the gauge on for the first time, set up the software. The
gauge stores the software setup, so the operator does not need to
enter a new setup each time the gauge is turned on.
The gauge setup includes the measurement units (Metric or
English), date and time, temperature, customer name, external
beeper setup, user ID, mix calibration, and the layer thickness
function.
To access the Setup menu, press the 〈SETUP〉 key. The gauge
displays:
-Setup- ¦
1. Set Units
2. Date/Time
3. Temperature
-Setup- ¦
4. Customer Name
5. External Beeper
6. User ID
-Setup- ¦
7. Mix Calibration
8. Layer Thickness
To scroll through the Setup menu, use the arrow keys (screens that
have options the operator can scroll through are indicated with the
up/down arrow symbol in the upper right corner of the screen). To
select a menu option, use the numeric key that corresponds to the
option. To return to the Ready screen, press the 〈ESC〉 key.
The remainder of this section provides details on the setup options.
To Next Page
Loading...
