2–8
SET UNITS
The gauge can display measurement results in either metric (SI) or
English units. To set the units, press 〈1〉 at the Setup menu shown
on page 2–7. The gauge displays:
-Units-
1. English
2. Metric
Press # to Select
Select the desired measurement units by pressing the corresponding
numeric key. The gauge displays the new units, then returns to the
Setup menu.
DATE/TIME
The Date/Time function allows the operator to change the date and
time, and to select the display format for each. To access the
Date/Time menu, press 〈2〉 at the Setup menu shown on page 2–7.
The gauge displays the Date/Time menu:
-Date/Time- ¦
1. Change Time
2. Change Date
3. Time Format
-Date/Time- ¦
4. Date Format
From this screen, the operator may change the time, date, or
time/date display format. Use the up and down arrows to scroll
between the menu options. To select a menu option, press the
corresponding numeric key. To return to the Setup menu, press the
〈ESC〉 key.
To Next Page
Loading...
