Model 2701-B 2–11
2. GETTING STARTED
CUSTOMER NAME
The Model 2701-B can store a customer name of up to 12
characters. To enter a customer name, press 〈4〉 at the Setup menu
shown on page 2–7. The gauge displays the current customer name
on the second line.
Customer Name is:
CUSTOMER
Change Name?
<YES> or <NO>
To change the customer name, press 〈YES〉. The gauge displays:
Customer Name: A
Input Name and
Press <ENTER>
Press the 〈ALPHA LOCK〉 key to enable the alphabetic keys on the
gauge. When the alphabetic keys are enabled, the symbol A appears
in the upper right of the display, as shown above.
Enter the new name and press the 〈ENTER/START〉 key. The
gauge stores the new customer name, then returns to the Setup
menu.
To Next Page
Loading...
