Model 2701-B Appendix A–3
. TROUBLESHOOTING
INTERNAL GAUGE TEMPERATURE
High internal temperatures may damage the gauge’s electronic
components. To reduce the risk of damage, DO NOT allow the
gauge to sit on hot asphalt for extended periods.
If the internal temperature of the gauge reaches a level that is
considered excessive, the beeper will sound and the following
warning message is displayed:
Internal temp. high
Allow gauge to cool
Press Enter to
resume
The gauge should be taken to a shaded or air-conditioned
environment and allowed to cool before continuing. If
measurements are performed before the gauge is allowed to cool,
the warning symbol ! is displayed.
To Next Page
Loading...
