Troxler PaveTracker Plus - ENTER A NEW TARGET VALUE; DISABLE THE TARGET VALUE

Model 2701-B 2–15
2. GETTING STARTED
ENTER A NEW TARGET VALUE
To enter a new target value, press 〈5〉 at the target value menu. The
gauge displays:
Gmb(Marshall) Value:
0.0 pcf
Press <ENTER>
Use the numeric and decimal keys to enter the target value. Press
the 〈ENTER/START〉 key. The gauge displays:
Gmb(MA) = ##.#
Do You Want to
Save This Value
for Late Use?
To store the value, press the 〈YES〉 key. To use the value now
without storing it for later use, press the 〈NO〉 key.
If the operator presses the 〈YES〉 key to store the target value, the
gauge displays:
Select Memory Cell
1. #.# 2. #.#
3. #.# 4. #.#
Press # To Select
The gauge can store the target value in one of four memory cells.
Use the numeric keys to store the target value. Note that this will
replace any target value that was previously stored in the memory
cell. The gauge enables the target value, displays a brief
confirmation message and returns to the Ready screen.
DISABLE THE TARGET VALUE
To disable the current target value, press 〈6〉 at the target value
menu. The gauge disables the target value, displays a brief
confirmation message, and returns to the Ready screen.