5–2
HANDLING PROJECT DATA
The Model 2701-B can store approximately 1000 readings. The
Project and Store functions allow handling of measurement data.
Measurement results are stored in files (memory locations) called
projects, which are named by the operator. The Project function
allows the operator to create a new project, view project data, select
a project (make an existing project active so that additional data
may be added to it), output the data stored in the project, or erase
projects. The Store function allows the operator to store
measurement results and other test-identifying information in a
selected project. Refer to page 5–8 for information on the Store
function.
To access the Project function, press the 〈PROJ〉 key. The gauge
displays the Project menu:
-Project- ¦
1. Select
2. View
3. Create
-Project- ¦
4. Erase
5. Output
Use the arrow keys to scroll through the menu options. Use the
numeric keys to select a menu option. Press 〈ESC〉 to return to the
Ready screen.
SELECT
To select an existing project, press 〈1〉 at the Project menu shown
above. If no projects have been created, the gauge displays the
message No Projects are stored.
To Next Page
Loading...
