3–8
The gauge displays:
<STORE> for Next
<ENTER> to Calculate
Press the 〈STORE〉 key to store the values and to enter those for the
next location. When the measured and actual densities for each
location have been entered, press the 〈ENTER/START〉 key to
calculate the mix calibration. The gauge displays:
Slope = #.##
Intercept = ###.#
Do you want to
accept this mix?
To return to the Setup menu without saving the mix calibration,
press the 〈NO〉 key. To save the mix calibration, press the 〈YES〉
key. The gauge requests a mix calibration ID as shown:
Mix Calib. ID
<ALPHA> for Letters
Press <ENTER>
Press the 〈ALPHA LOCK〉 key to enable the alphabetic keys on the
gauge. When the alphabetic keys are enabled, the symbol A appears
in the upper right of the display, as shown above.
Enter a unique mix calibration ID and press 〈ENTER/START〉. The
gauge displays:
Select Memory Cell
1. Empty 2. Empty
3. Empty 4. Empty
Press # To Select
To Next Page
Loading...
