Troxler PaveTracker Plus - Page 64

5–6
NOTE
To upload data to a computer, use the HyperTerminal®
application available from the Windows® Accessories
menu. This application can be used to transfer data
from the gauge to the computer.
At the Project menu shown on page 5–2, press 〈5〉. The gauge
displays the Output menu:
Output:
1. One Project
2. All Projects
Press # to Select
From this menu, the gauge can print (or upload) either a single
project or all projects.
To output a single project, press 〈1〉. The gauge displays:
Prj: XXX ¦
Arrows for Scroll
<ENTER> to Select
Use the arrow keys to scroll through the project names displayed on
the first line. When the gauge displays the desired project, press
〈ENTER/START〉.
To output the data from all projects, press 〈2〉.
For either selection, the gauge displays:
Output:
1. 32 Column Report
2. Spreadsheet
Press # to Select