EasyManua.ls Logo

True ZTX 825 - Quarterly Care and Service

True ZTX 825
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section E
97
Maintenance Schedules
Quarterly Maintenance Schedule
Year ______________
Initial As Completed
Photocopy
and Keep
This Original
for Repeated
Use
Interior Cleaning/
Quarter Inspection
Jan-March
April-June
July-September
October-December
Quarterly Care and Service
CAUTION:
Servicing is to be done with appliance disconnected
from the supply circuit. To disconnect, turn all controls
to the off position, then remove the plug from the outlet.
La Prudence:
Servicing is to be done with appliance disconnected
from the supply circuit To disconnect, turn all controls
to the off position, then remove the plug from the outlet.
Once every three (3) months we recommend that the motor cover be removed and the
motor area vacuumed thoroughly to remove dust and particles. Only authorized service
personnel should perform this procedure as only authorized service technicians are allowed
access to the area under the motor hood. A thorough visual inspection should be performed
at this time as well. Have the technician check for tight wire harness connections, damaged
motor or power wires, tight motor and tensioner bolts, tight ground screw connections
and wire tie downs, properly attached incline motor cotter pin and clevis pin, and tight
motor controller and interface screws.
Expert service and maintenance at a modest cost are available through your factory trained
authorized TRUE dealer. He maintains a stock of repair parts and has the technical
knowledge to meet your service needs.

Table of Contents