True ZTX 825 - Manual Mode Workout Instructions

Section C
33
Manual Mode
Preliminary Instructions
Helpful Operations
• To set the countdown feature that causes the time or
distance to count down rather than starting at “0” and
counting up:
1. Press .
The following messages will repeat themselves in the Message
Center one at a time:
ADJUST TIME +
PRESS START
2. Use
to enter a value for time.
3. Press the key to set the time.
The following messages will repeat themselves in the Message
Center one at a time:
ADJ DISTANCE +
PRESS START
4. Press to enter the distance.
5. Press to set the distance.
The following messages will repeat themselves in the Message
Center one at a time:
MANUAL
EDIT-SELECT
NEXT UP/DOWN
PRESS START
NOTE:
When using the countdown feature, both time and distance
functions will give you an audible signal and begin counting
up when the time or distance has reached “0”. The tread belt
will continue to move.