Section B
22
Manual Mode
Workout Instructions (Continued)
Helpful Operation
•
To reset distance, time, or calories during the workout,
press and hold until a 0 appears in the Primary
Display Window.
Ending Workout Instructions
5. Press to reduce speed to 2 MPH.
6. Press to end workout.
The treadmill will pause and the Primary Display Window will display your
accumulated workout data for 30 seconds after which the treadmill resets.
Helpful Operation
•
Press and hold to reset the Upper Control Panel to the
weight prompt when the machine is not in use.
•
To change from scan mode to hold on a specific display, press
when that indicator is blinking. The indicator will then
remain lit. A blinking indicator tells you the display is in scan
mode and will rotate through all the displays. It changes from
one display to the next every five seconds.
To Next Page
Loading...
