41
Violation Gauge Mode would be preceded by entering Delayed
Violation Mode #2, or if High O2 occurs while in Deco.
The Element will also enter Violation Gauge Mode 5 minutes
after reaching the surface from a dive in which a Delayed
Violation occurred.
On the surface, Violation Gauge Mode displays the Surface
Interval, Temperature, the graphic Vio alternating with Time of
Day, Dive Number, and NiBG and O2BG with all segments of
both flashing (Fig. 46). It does not provide the FO2, Plan, or
Time to Fly and Desaturate features.
The countdown timer that appears when you try to access Time
to Fly does not represent Time to Fly. It is only provided to
inform you of the time remaining before normal operation can
resume with full features and functions.
NOTE: In the event that a dive is made during the 24
hour period after surfacing, a full 24 hour surface
interval must then be served after that dive before all
functions are restored.
Fig. 46 - VIOLATION
GAUGE MODE (Surface)
To Next Page
Loading...
