65
OPERATIONAL PERFORMANCE (continued)
Setting FO2:
• Automatically set for AIR' upon activation
• Remains set for AIR unless an FO2 numerical value is set
• Nitrox Set Points from 21 to 50 %
• If set for 21%, remains set for 21% until changed
• If set for >21%, it reverts to 50% 10 minutes after the dive, if the FO2 Default is ON. If the FO2 Default is OFF, the
value will remain at the value set for that activation period.
Operating Temperature:
• The Element will operate in waters having temperatures between 32°F and 140°F (0 and 60°C).
At extremely low temperatures, the LCD may become sluggish, but this will not affect it's accuracy. If stored or
transported in extremely low temperature areas (below freezing), you should warm the module and its battery with
body heat before diving.
SPECIFICATIONS (CONTINUED)
To Next Page
Loading...
