Page 50 of 83 Pages
6.7 Maintenance
This directory includes four subdirectories
The following screen will be displayed when entering
MAINTENANCE
directory:
1. In order to enter to the sub directories move the cursor by pressing
UP or DOWN keys to the required item and press START/STOP
key
2. In order to exit this screen follows one of the next:
Move the cursor to Exit with the UP or DOWN keys and select it
by pressing the
START/STOP key.
Press the UP and DOWN keys simultaneously.
6.7.1 Set date and time
This subdirectory enables the operator to set the date and time.
This
SET DATE AND TIME screen will be displayed when
entering the subdirectory:
When entering the SET DATE AND TIME screen, the time
and date are displayed. The cursor is blinking on the "second"
digit.
The time is displayed in the upper row in the form
"HH:MM:SS". The hour range is 24 hour (i.e. from "0" to "24")
The date is displayed in the lower row in the form
"DD:MMM:YYYY".
To Next Page
Loading...
