Page 22 of 83 Pages
4.1.3 Printer
The printer is an optional device.
It prints the detailed history of each cycle performed by the
autoclave. The printing is on thermal paper with 24 characters
per line and records the sterilization cycle information for
subsequent consideration.
4.2 Displayed Error Messages / Symbols
The failures are divided into two categories.
a. Failure that occur before completing the sterilization stage, which in
this case will leave the load unsterilized
b. Failure that occur after completing the sterilization stage, which in
this case will leave the load sterilized
For the list of
Displayed Error Messages / Symbols
see sec. 13. TROUBLESHOOTING
To Next Page
Loading...
