Uniden BC246T - Page 37

37
Setting Up Your Scanner
/4
4 – Enters a 4.
+ – Moves the active char-
acter to the left while editing data.
6/
6 – Enters a 6.
+ – Moves the active char-
acter to the right while editing data.
7/Rcl 7 – Enters a 7.
+ Rcl – Displays a series of
prompts to quickly select a specific
channel in the scan hold mode.
No
//Rev
– Enters a decimal point or dash
in a frequency or talk group ID,
enters an “i” for I-Call input.
At a prompt, answers “No.”
+ Rev – Monitors the cur-
rently-tuned frequency’s reverse
frequency.
E/Yes/Att E – Press to select input and menu
items, to quickly edit a channel in
Scan Hold Mode, and store a fre-
quency into memory in Scan Hold
mode.
At a prompt, answers “Yes.”
+ Att – Turns the scanner’s
attenuator on or off for the current
channel (for conventional systems)
or system (for trunked systems).
Key Name Description
Func
Func
Func
Func
Func