Uniden BC246T - EDACS System Frequency Configuration; Setting System Frequencies and LCN; Entering EDACS Channel Groups

56
Programming Radio Systems
• See “Setting I-Call (Motorola and EDACS Systems
Only)” on Page 66
• ee “Setting Emergency Alert (Motorola and EDACS
Systems Only)” on Page 67
• See “Setting the EDACS ID Format” on Page 67
• See “Reviewing Locked Out Frequencies” on
Page 86
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 75
• See “Deleting Systems” on Page 69
• See “Copying/Pasting Systems” on Page 69
• See “Setting System Frequencies” on Page 56
• See “Entering/Editing EDACS Channel Groups”
on Page 56
Setting System Frequencies
SET FREQUENCIES  E 
  NEW FREQUENCY E
Input a system frequency, then press E. The scanner then
prompts you to enter the LCN for the entered frequency.
Enter the LCN, then press E.
To enter additional frequencies, press , scroll to New
Frequency, then repeat the above.
Note: The scanner only accepts a single frequency and
no LCN for SCAT systems.
Entering/Editing EDACS Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Setting Up a Channel Group
  EDIT GROUP E 

 NEW GROUP E
Menu