67
Programming/Editing Optional Settings
On - the scanner tracks I-calls
Off - the scanner ignores I-calls
Only - the scanner only tracks I-calls and ignores other
radio traffic on the system.
Note: The default setting is Off.
Setting Emergency Alert
(Motorola and EDACS Systems Only)
Program SysteMS E
Select the system E
Edit Sys Option E
Set EMERGENCY ALERT E
This setting determines how your scanner handles radio
traffic that has the emergency flag set. Select your setting
then press E.
Alert - the scanner sounds an alert beep to notify you of
the emergency transmission.
Ignore - the scanner does not alert you to emergency
transmissions.
Note: The scanner defaults to Ignore.
Setting the EDACS ID Format
EDACS talkgroup ID's are commonly provided in one of
two formats: AFS and Decimal. This setting determines
how you enter EDACS ID's and how the scanner displays
them.
AFS Format - the scanner uses AFS format for talkgroup
ID's
Decimal Format - the scanner uses decimal format for
talkgroup ID's
Notes:
Menu
To Next Page
Loading...
Need help?
General
