Uniden BC246T - Managing Conventional Channels; Setting Up a Channel Group; Entering and Editing Conventional Channels

51
Programming Radio Systems
Setting Up a Channel Group
  Edit Group  E 
  New Group  E
The scanner creates a group with a default name of
Group nn. nn increments by one for each new group you
create within a system.
Refer to the appropriate section to set group-wide
options:
• See “Entering/Editing the Group Name” on Page 70
• See “Setting the Group Quick Key” on Page 70
• See “Deleting Groups” on Page 71
• See “Copying/Pasting Systems” on Page 69
• See “Entering/Editing Conventional Channels” on
Page 51
Entering/Editing Conventional Channels

 Edit Channel  E 
  New Channel  E  Input Frequency
Enter the frequency for the channel, then press E. Then,
refer to the appropriate section to change a channel
setting:
• See “Editing the Channel Name” on Page 71
• See “Setting Channel Priority (Conventional Chan-
nels Only)” on Page 72
• See “Setting Channel Alert” on Page 73
• See “Deleting Channels” on Page 77
• See “Copying/Pasting Channels” on Page 77
To program another channel within the same group, press
, then repeat the above.
To create another channel group and enter more
channels, press twice, then proceed from “Setting
Up a Channel Group” on Page 51.
Menu
Menu