86
Search and Close Call Options
Search and Close Call Options
The settings in this section affect custom searches,
service searches, and Close Call operation.
Managing Locked-Out Frequencies
While searching or during Close Call operation, if you
press L/O while the scanner is stopped on a frequency,
this frequency is lockout out of these modes. You can
lockout up to 200 frequencies.
Note: Locking out a frequency does not lock out a chan-
nel that contains that frequency.
Unlocking All Frequencies
Srch/CloCall Opt E
Freq Lockouts E Unlock All E
The scanner prompts you to confirm deletion. To confirm
and delete all locked-out frequencies, press E. Otherwise,
to cancel, press No.
Reviewing Locked Out Frequencies
Srch/CloCall Opt E
Freq Lockouts E Rvw Search L/O E
The scanner displays the first locked-out frequency and
prompts you to unlock the frequency. Press E to unlock
the frequency. Or, rotate scroll or press No to select a dif-
ferent frequency. To exit the review, press .
Searching for Subaudible Tones
Srch/CloCall Opt E
CTCSS/DCS Search E
This setting controls whether the scanner will search for a
subaudible tone when it stops on a transmission during
search or Close Call operation.
Off The scanner does not search for subaudible tones.
Menu
Menu
Menu
MENU
Search and Close Call Options
To Next Page
Loading...
