Uniden BC246T - Navigating Scanner Menus and Controls; Using the Menu System

39
Setting Up Your Scanner
Using Menu
Press on the left side of the scanner to enter the
menu. See “Using the Menu” on Page 47 for more
information about the scanner’s menu options.
Using Func
To select the function labeled below a key on the front of
the scanner, hold down on the left side of the
scanner, then press that key. To hold on a system while
scanning or temporarily stop on a channel while searching,
press . To select a system in Scan or Scan Hold
mode, hold down and rotate the scroll control.
Using the Scroll Control
Turn the scroll control on top of the scanner to select a
channel or frequency in Hold mode, select menu items in
Menu mode, and to select a character while editing a
name. You can also press the scroll control down instead
of pressing E on the keypad to select an item.
Menu
Menu
Func
Func
Func
Func
Vol Sql
Scroll
Control