Uniden BC246T - Other Scanner Settings

45
Other Settings
Other Settings
Displaying System Information
Viewing Memory Used
  See Scanner Info  E 
% Memory Used  E
A bar showing the percent of memory used appears.
Press a key, to returns to the previous menu.
Viewing the Firmware Version
  See Scanner Info  E 
Firmware Version  E
Press a key to return to the previous menu.
Adjusting the Key Beep
  Adjust Key Beep  E
• Off: The scanner is silent when you press a key.
• On: The scanner beeps when you press a key.
Locking/Unlocking the Keypad
Press then / to lock or unlock the keypad.
Turning Power Save On or Off
  Set Battery Save  E
• On: The scanner goes into low-power mode when you
monitor a conventional channel that has no activity.
• Off: Power save is off.
Priority Scan
  SeT Prioirty  E
Or, while holding on any channel, press + 1/Pri to
select one of these priority modes:
• Priority Off: Normal scanning
Menu
Menu
Menu
Func
Menu
Menu
Func
Other Settings