Uniden BC246T User Manual

50
Programming Radio Systems
Programming Conventional Systems
 Program SysteMS  E 
New System  E  Conventional 
E  Confirm?  E
The scanner creates an empty conventional system, with
a default name of System nnn C. nnn increments
as you add new systems. C indicates that this is a conven-
tional system.
Refer to the appropriate section to set system-wide
options:
• See “Editing the System Name” on Page 61
• See “Editing the System Quick Key” on Page 62
• See “Setting System Lockout” on Page 62
• See “Setting the System Hold Time” on Page 63
• See “Setting the Channel Delay Time” on Page 63
• See “Setting Data Skip (Conventional Systems Only)”
on Page 64
• See “Deleting Systems” on Page 69
• See “Copying/Pasting Systems” on Page 69
• See “Entering/Editing Conventional Channel Groups”
on Page 50
Entering/Editing Conventional
Channel Groups
To enter channels in a conventional system, first set up a
channel group (or groups) to hold the channels. Then,
enter the channel and channel parameters in the group(s).
Menu

Uniden BC246T Specifications

General

Brand	Uniden
Model	BC246T
Category	Scanner
Language	English