33
Setting Up Your Scanner
Connecting an Earphone/Headphone
For private listening, you can plug a
1
/8-inch (3.5 mm)
mini-plug earphone or headphones (not supplied) into the
headphone jack on top of your scanner. This automati-
cally disconnects the internal speaker.
Connecting an Extension Speaker
In a noisy area, an optional amplified extension speaker,
positioned in the right place, might provide more comfort-
able listening. Plug the speaker cable's
1
/8-inch (3.5-mm)
mini-plug into your scanner's jack.
WARNING!
If you connect an external speaker to the scanner's
headphone jack, never connect the audio output line
to a power supply and ground. This might damage the
scanner.
Attaching the Belt Clip
To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Use a Phillips screw-
driver and the supplied screws to attach the clip to the
scanner.
To Next Page
Loading...
Need help?
General
