Making calls 93
Ending a consultation call
You end the consultation
Press the Softkey. The consultation call is disconnected. The call with the first
party is resumed.
The second party hangs up
If the second party hangs up, you will be prompted to retrieve the first call again
if "Hold and hang-up" is disabled (
page 209). Otherwise, the first call will re-
main on hold until you receive this prompt after a defined time interval.
Press the Softkey. You are reconnected with the first party.
Ending the consultation with an active headset
Press the Function key to activate automatic call answering. This key and the
headset key illuminate.
[ You are conducting a consultation call and the second party hangs up. You are
automatically reconnected with the waiting first party. The prompt "Retrieve held
call" does not appear.
End & reconnect
P
_
Retrieve held call
m
_
ñ
The administrator has additionally configured a key with the "Auto-Head-
set" function (AICS Zip tone) on a key module, in the left panel or in Favou-
rites menu ( page 136).
ä Auto-Headset å
_
To Next Page
Loading...
