Unify OpenScape Desk Phone IP 55G - Page 104

104 Enhanced phone functions
Activating/deactivating the hold reminder tone
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select the softkey to confirm.
Setting the hold reminder time
Use "Hold reminder" to specify when you want to receive an automatic reminder
about a held call. The minimum time value is 3, that
is, the reminder is output
after three minutes. The maximum value is 15 minutes.
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until "Settings" is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown. 
Select a value between 3 and 15 from the context menu and confirm.
Select the softkey to confirm.
Services
User
Configuration
Connected calls
Allow hold rem.
Yes
Save & Exit
Services
User
Configuration
Connected calls
Hold rem. delay
3
Save & Exit