82 Call forwarding
Activating/deactivating call forwarding
Prerequisite: A forwarding destination is already configured for the relevant for-
warding type.
Press the key shown.
The message:
"Set forward on to" is displayed with the last forwarding destination used. The
Softkey-Liste offers the following options:
• Accept
• Enter dest.
•Settings
• Cancel
Select the softkey to confirm.
Choose one of the forwarding types offered:
Unconditional (default setting is off)
Busy
No reply (after {1}s)
Here for instance Unconditional.
Select the softkey to confirm your selection. The forwarding type is activated or
deactivated.
The call forwarding settings can appear as follows:
Unconditional (default setting is off)
Busy
No reply (after {1}s)
Press to open the call view. If Unconditional was activated, the forwarding des-
tination is displayed with the forwarding icon and the Forward key illuminates.
The Busy and No reply (after {1}s) types of call forwarding are not displayed.
To Next Page
Loading...
