198 OpenScape Voice functions
Voice calling
From your phone, you can directly call any team member whose telephone has
a loudspeaker.
Voice calling with variable input of member number
^ Lift the handset.
j Enter the code for voice calling (see code table Page 201) followed by the one
or two-digit member number of the respective team member.
Z As soon as the connection has been established, you will hear a confirmation
tone/announcement and can speak to the other party via the loudspeaker.
] To end the call, simply hang up.
Voice calling to a saved member number
Prerequisite: The code for voice calling and the member number are pro-
grammed on a function key.
Press the programmed function key. A connection to that member's loudspeaker
will immediately be established: You can speak to the destination caller via your
speakerphone.
Two-way voice calling
From your phone, you can directly call any team member whose telephone has
a speakerphone function. The loudspeaker and microphone of the destination
phone are switched on automatically.
Two-way voice calling with variable input of member number
Press the key to use your speakerphone function.
j Enter the code for two-way voice calling (see code table Page 201) followed
by the one or two-digit member number of the respective team member.
Z As soon as the connection has been established, you will hear a confirmation
tone/announcement and can reach the destination caller via this caller's speak
-
erphone function.
Two-way voice calling to a saved member number
Prerequisite: The code for two-way voice calling and the member number are
programmed on a function key.
Press the programmed function key. A connection to the team member is estab-
lished immediately and your speakerphone function will be switched on.
Z As soon as the connection has been established, you will hear a confirmation
tone/announcement and can reach the destination caller via this caller's speak
-
erphone function.
To Next Page
Loading...
