Unify OpenScape Desk Phone IP 55G - Audio; Volumes; Settings

Individual phone configuration 217
Audio
Optimise the audio settings on your OpenScape Desk Phone for your work en-
vironment and according to your personal requirements.
Volumes
Set the volume here, for instance, for the loudspeaker, handset or headset.
You can preset different volumes for the following microphones and signals in
eight
levels:
• Loudspeaker
• Ringer
• Handset
• Headset
• Handsfree
• Rollover
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the volume you want to adjust (e.g. "Handset").
Confirm the option shown.
Adjust gradually using the softkey.
or
Adjust gradually using the softkey.
While setting the volume, you will hear corresponding 
audio feedback.
Select the softkey to end.
Select the softkey to confirm.
Settings
Room character
To ensure that the other party can hear you properly in speakerphone mode, you
can adjust the phone to the room acoustics by choosing one of the following
room character conditions:
• Normal
•Echoing
•Muffled
z
You can also configure this setting via the WBM interface  Page 247.
Services
User
Audio
Volumes
Handset
Decrease
Increase
Done
Save & Exit