Unify OpenScape Desk Phone IP 55G - Assigning a Destination Phone Number to a Call Type; Activating;Deactivating Call Forwarding

90 Call forwarding
Assigning a destination phone number to a call type
Prerequisite: At least one destination phone number has already been saved.
Press the key shown.
Select the softkey to confirm.
Select the forwarding type and confirm (here for instance Unconditional).
Select the call type (here for instance Internal only calls).
Press the softkey with the saved number (favourite).
The call type is activated and the new destination is displayed.
Press to open the call view.
Activating/deactivating call forwarding
Prerequisite: One or more forwarding destinations are already configured for
the relevant call type(s).
Press the key shown.
The message:
"Set forward on to" is displayed with the last forwarding destination used and
the Softkey-Liste offers the following options:
• Accept
• Enter dest.
•Settings
• Cancel
Select the softkey to confirm.
The list of forwarding types is displayed:
• Unconditional
•Busy
• No reply
Forward
Settings
Unconditional
 Internal only calls
3339
 Internal only calls 3339
Phone
Forward
Settings