Unify OpenScape Desk Phone IP 55G - Settings for Multiline (Keyset); Displaying the Line on the Overview Tab

Making calls with multiple lines 147
Settings for MultiLine (keyset)
The details for each keyset line contain supplementary information for the user.
The following uneditable fields are displayed:
•Address
– Displays the phone number for the line
• Ringer on/off
– Shows whether the ringer is activated for this line
• Selection sequence
– Displays the priority of each line seizure when the handset is lifted or the
loudspeaker key for this line is pressed
Displaying the line on the "Overview" tab
Specify here if the selected line should be displayed on the "Overview" tab.
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required line (e.g. primary line).
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select the softkey to confirm.
Services
User
Configuration
Keyset
Lines
Primary Line 1
Allow in overview
Yes
Save & Exit