OpenScape Voice functions 197
Voice calling and two-way voice calling
function
With voice calling or two-way voice calling, the loudspeaker or speakerphone
function of a destination phone is activated automatically when the connection
is established. Use of these functions is conceivable for
example between an
executive and secretary or between a doctor and receptionist.
Possible functions include:
• Voice calling
– with variable input of member number
– to a saved member number
• Two-way voice calling
– with variable input of member number
– to a saved member number
Prerequisites:
• The team member belongs to the same collective group as you and has like-
wise been assigned a member number.
• The team member's phone has a loudspeaker (voice calling) and/or a speak-
erphone function (two-way voice calling).
• Automatic answering is activated for the team member.
• The team member's phone is idle.
• The member numbers of the callers are known for the voice calling and two-
way voice calling functions.
You can cancel voice calling or two-way voice calling by replacing the handset
or - during a consultation - resume the held call.
Two-way voice calling connections can be established from the following states:
• In idle status
• During manual call holding
• In a consultation
Functions such as "Call forwarding" or "Do not disturb" are temporarily dis-
abled on the destination caller's phone by the voice calling and two-way
voice calling functions.
To Next Page
Loading...
