Unify OpenScape Desk Phone IP 55G - Programming Function Keys; Initiating Programming

Programmable function keys 93
Programming function keys
Initiating programming
Directly via the function key
Hold down the key you want to assign a function to until the programming
prompt is displayed.
Confirm to begin programming. The key illuminates continuously.
or Via the user menu
You can also program keys via the user menu.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted to press the key you
wish to program.
Press the key you want to program with a function. The key illuminates continu-
ously.
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (ask your admin
-
istrator about the current setting).
OK
Services
User
Phone
Program keys