Unify OpenScape Desk Phone IP 55G - Automatic Screensaver Activation

210 Individual phone configuration
Automatic screensaver activation
Set how long OpenScape Desk Phone should be idle before the screensaver
automatically activates.
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm the option shown
1
. Select the required value between 0 and 120 and
confirm.
Select the softkey to confirm.
Services
User
Phone
Screensaver
Start (Min)
1. The phone displays the current setting.
Save & Exit