Unify OpenScape Desk Phone IP 55G - Resetting User Data; Initiating the Reset

Individual phone configuration 231
Resetting user data
The following user-specific settings, which you changed via the phone menu or
the web interface, can be reset to factory settings.
• Display settings
• Language setting
• Screensaver
• Audio settings
– Volumes
–Settings
• Configuration
– Context menu
• Phonebook
– All entries are deleted.
• Call lists
– All entries are deleted.
• Function keys
– All personalised programming is deleted (see also
 Page 98).
Important: All data is reset without a warning tone. If necessary back up your
data on a USB memory stick (
 Page 232).
Initiating the reset
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Confirm the option shown.
Confirm the option shown.
Select and confirm the option shown in the context menu.
Select the softkey to confirm. All personalised programming is deleted.
Select the softkey to confirm. The user data is reset to factory settings.
Personal images for the screensaver are deleted and deleted default im-
ages are restored (administration e.g. using the OpenStage Manager).
Personal ringtone files are deleted and deleted default ringtone files are
restored (administration e.g. using the OpenStage Manager).
Services
User
Reset
Function key data
Yes
Reset selected
Reset all