50 Basic functions
Suggestions for using speakerphone mode:
• Tell the other party that speakerphone mode is active.
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
50 cm.
Accepting a call via the headset
Prerequisite: A headset is connected.
Answering calls via the headset key
The phone rings. The Headset key flashes.
Press the key shown.
if nec. Adjust the call volume Page 22.
Answering calls automatically via the headset
Prerequisite: The administrator has additionally configured a key with the "Au-
to-Headset" function (AICS Zip tone) ( Page 92).
Press the "Auto-Headset" function key to activate automatic call answering. This
key and the headset key illuminate.
A short acoustic signal is heard on the headset for a call and the connection is
established.
If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.
Make sure your headset port is set up properly Page 221.
To Next Page
Loading...
