Unify OpenScape Desk Phone IP 55G - Saving Destination Phone Numbers for Call Forwarding

86 Call forwarding
Using last forwarding destination
Confirm with the softkey to use the last saved destination for Unconditional
again. Call forwarding to this destination is immediately activated for Uncondi
-
tional and the Forward key illuminates.
If you do not confirm call forwarding immediately, it will be enabled automatically
after approx. 3 seconds.
or Activating with variable destination phone numbers
If you want to use a new forwarding destination:
Select the softkey to confirm.
j Enter and confirm the new destination phone number. 
or
Confirm the saved destination phone number with the softkey (displayed).
Call forwarding to this destination is immediately activated for Unconditional and
the Forward key illuminates.
Saving destination phone numbers for call forwarding
Press the key shown.
The message:
"Set forward on to" is displayed with the last forwarding destination used and
the Softkey-Liste offers the following options:
• Accept
• Enter dest.
•Settings
• Cancel
Select the softkey to confirm.
You are then offered three forwarding types in the Forwarding menu with three
call types each and with frequently used destination numbers preassigned by
default:
• Unconditional
–Any call
– External only calls
– Internal only calls
•Busy
–Any call
– External only calls
– Internal only calls
• No reply
–Any call
– External only calls
– Internal only calls
• Edit favorites
Saving a destination phone number
Accept
Enter dest.
3339
You can alternatively enter the call forwarding settings via the user menu
(
 Page 101) or also using the WBM interface  Page 247.
Forward
Settings