Unify OpenScape Desk Phone IP 55G - Setting Headset Port Use

Individual phone configuration 221
Opening listening mode
Select the mode here that you prefer for open listening  Page 53
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select and confirm the setting
1
you want in the context menu ("Standard mode"
or "US mode).
Select the softkey to confirm.
Setting headset port use
Here you set whether you are using a wired or cordless DECT headset.
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select and confirm the relevant option
2
shown in the context menu:
• Wired headset
• Cordless headset
• Conference unit
Select the softkey to confirm.
Services
User
Audio
Settings
Open listening
Standard mode
1. The phone displays the current setting
Save & Exit
Services
User
Audio
Settings
Headset socket
Wired headset
2. The phone displays the current setting
Save & Exit