220 Individual phone configuration
Pattern melody
z
You can also configure this setting via the WBM interface Page 247.
Prerequisite: You have chosen the "pattern" ringtone, see Page 219.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select the softkey to confirm.
Select the required pattern melody
1
in the context menu between 1 and 8
(e.g. 4). You will immediately hear the corresponding Pattern melody.
Confirm the selected Pattern melody.
Select the softkey to confirm.
Pattern sequence
z
You can also configure this setting via the WBM interface Page 247.
Prerequisite: You have chosen the "pattern" ringtone, see Page 219.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select the softkey to confirm.
Select the required Pattern sequence in the context menu between 1 and 6 (e.g. 2). You
will immediately hear the set Pattern melody with the selected Pattern sequence.
Confirm the selected Pattern melody.
Select the softkey to confirm.
1. The phone displays the current setting
To Next Page
Loading...
