Unify OpenScape Desk Phone IP 55G - Defining the Ring Duration before Call Forwarding on no Reply

Call forwarding 83
Defining the ring duration before call forwarding on no
reply
You can define how long the phone should ring before "No reply (after {1}s)" call
forwarding activates.
z
You can also configure this setting via the WBM interface  Page 247.
Prerequisite: The phone is idle.
Press the key shown.
Select the softkey to confirm.
Select the forwarding type.
Select the softkey to confirm. 
j Enter the required time in seconds (max. 60 seconds).
Select the softkey to confirm. The newly set time is displayed with the option.
Press to open the call view.
This setting is only available if the "Server features" function was deacti-
vated by administrator.
Forward
Settings
 No reply (after {1}s) g3335
Set delay
Save & Exit
Phone