Unify OpenScape Desk Phone IP 55G - Manual Line Seizure; Automatic Line Seizure; Dialling the Last Dialled Number

126 Making calls with multiple lines
Manual line seizure
^ Lift the handset
or or or press the speakerphone key or headset key.
Press the required line key.
or
With the handset on hook, press the key shown until the application tab
Overview is active  Page 35.
Select and confirm the required line (e.g. line 2). The tab for this line is displayed.
j Enter the phone number or use redial, for example. The connection is set up.
Automatic line seizure
Prerequisite: Your administrator has configured automatic line seizure.
^ Lift the handset
or or or press the speakerphone key or headset key.
The line defined during configuration is seized.
j Enter the phone number and confirm. The connection is set up.
Dialling the last dialled number
The last phone number dialled on your telephone – on the primary line in the
case of line keys – is displayed for redialling in a pop-up menu.
^ Lift the handset
or or or press the speakerphone key or headset key.
Seize the required line  Page 125.
Select the softkey to confirm
1
. The connection is set up.
Speaker
Headset
Phone
Line 2
Speaker
Headset
Speaker
Headset
Redial {1}
1. Please note the information in relation to the call journal on  Page 65