242 Call recording
Second call during call recording
Prerequisite: You are conducting a call. Recording has started. The recording
button LED is lighting.
[ You are conducting a call. You hear a beep and the recording symbol | is
shown on the display. The call is now being recorded.
A second call party camps on Page 107.
Select the softkey to confirm.
You are connected with the second party. You hear a beep and the recording
symbol
| is shown in the line for the second call – this call is now being record-
ed. The first party is placed on hold.
Call recording while alternating
Prerequisite: You have an active or held consultation or second call. Recording
has started. The recording button LED is lighting.
[ You are connected with the second party. You hear a beep and the recording
symbol
| is shown in the line for the second call.
Confirm with the softkey for this connection.
[ You are switched to the main call. You hear a beep and the recording symbol |
is shown in the line for the main call – this call is now being recorded.
You can pause and restart the recording at any time in manual and autostart
modes.
Your call is paused and reconnected during the
recording.
Prerequisite: You are conducting a call that is being recorded.
Z Your call partner has placed the call on hold. You hear the music on hold. The
recording is paused and the recording symbol
| has disappeared from the dis-
play.
[ Your call partner resumes the call. You hear a beep and the recording symbol
| is shown on the display.
To Next Page
Loading...
