Unify OpenScape Desk Phone IP 55G - Key Click

Individual phone configuration 225
Key click
You can select here whether a tone should be heard when a key is pressed. You
can also decide whether this should apply for all keys or only those on the key
-
pad. In addition, you can adjust the tone volume or disable the tone.
z
You can also configure this setting via the WBM interface  Page 247.
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Setting the volume for Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume setting. You can choose be-
tween the following three options:
•Low
• High
• Off (no click)
Key selection
Select and confirm the option shown.
Select and confirm if only the keys for entering characters are to be affected.
or
Select and confirm the option shown for all keys.
Select the softkey to confirm.
Services
User
Phone
Key click
Volume
Medium
Keys
Keypad only
All keys
Save & Exit