Unify OpenScape Desk Phone IP 55G - Making Calls with Multiple Lines; Incoming Calls; Accepting Calls for the Primary Line

124 Making calls with multiple lines
Making calls with multiple lines
You can use your OpenScape Desk Phone IP 55G as a multi-line phone. If you
have any questions regarding how to configure your phone as a multi-line
phone, please contact your administrator.
The following is a description of the telephony scenarios for multi-line phones.
To facilitate understanding, you should familiarise yourself with the enhanced te
-
lephony application and how to use the line keys beforehand. Furthermore, you
can specify individual settings for your multi-line telephone. Refer to the follow
-
ing sections for a detailed description of the individual components:
• Introduction to multi-line phones  Page 14
• Lines and line keys
 Page 25
• Multi-line telephony interface
 Page 35
• Individual settings
 Page 147
Incoming calls
Depending on your individual settings, you will be notified of incoming calls
 Page 220.
Accepting calls for the primary line
In this case, the telephone behaves in the same way as a single-line telephone.
See
 Page 48 and  Page 99.
Accepting a call via the headset
Press the flashing key for the main line
or
J Press the answer key on the headset to answer the call.